SILICONE-FREE MOULD RELEASE AGENT, WITH NON-GREASY FILM
NSF H1 CERTIFIED FOR MATERIALS USED IN THE FOOD INDUSTRY
PLASTIC INJECTION MOULD RELEASE
NON-STICK IN LOST WAX FOUNDRIES
MOULD RELEASE FOR COMPOSITES,
FOR COMPRESSION OF PARTICLE BOARD PANELS
PAINTABLE, WELDABLE, ALLOWS ALL SURFACE TREATMENTS
EXCELLENT FINISH AFTER DEMOULDING
Product for the food industry (IAA)
Using an HACCP approach or method
Analysis of dangers and critical points to control them
ISO 22 000 CODEX ALIMENTARIUS
H1 lubricant : usable in food manufacturing areas. Usable as an anti-corrosion agent, non-stick for tank lid seals, lubricant for equipment located in potential food-contact areas.
DÉMOPLAST® 750 is a mould release agent for plastics. It allows all subsequent coating operations: painting, silk screen printing, bonding, or any decoration.
DÉMOPLAST® 750 has excellent non-stick and lubrication properties, making it an ideal mould release for all manufacturing processes: injection, extrusion, blow moulding, thermoforming or press moulding.
DÉMOPLAST® 750 facilitates the demoulding of materials such as polyamides, ABS, polyurethanes, epoxies, polyesters, and rubbers.
It leaves a very thin, dry film, which does not run. This leads to:
– Easy demoulding, even for the most complicated shapes;
– An excellent surface finish on the demoulded parts (avoiding surface defects such as roughness, streaks, and wrinkles).
It has no effect on most plastics, rubbers, and metallic surfaces.
DÉMOPLAST® 750 does not cause corrosion on moulds.
DÉMOPLAST® 750 facilitates ejection, eliminates problems such as superficial voids and spider web defects on the surface, and produces very high quality surface finishes without roughness, streaks, wrinkles or stains.
DÉMOPLAST® 750 gives excellent results as a non-stick agent to treat precision casting moulds working with the “lost wax” process.