• Via M.Ronto, 20 - 35124 Padova - Italia
  • Tel: +39 049 5917655
    Tel: +39 049 7333202
Contact Us

DP 10

DP 10

Product Description

  • TEN-FUNCTION AEROSOL FREES SEIZED PARTS
  • NSF H1 CERTIFICATION FOR FOOD INDUSTRY USE
  • READILY AND FULLY BIODEGRADABLE CEC L33 T82, OCDE 301 A
  • PENETRATES, FREES UP SEIZED PARTS, DEOXIDISES, LUBRICATES, PROTECTS AGAINST CORROSION
  • CLEANS, DEGREASES, DILUTES, CLEANSES, PREVENTS ADHESION
  • REMOVES TAR, REMOVES BITUMEN, LUSTERS ELASTOMERS
  • SAWING AND SLIDING WOOD IN THE SECOND STAGE OF PROCESSING

 

  • DESCRIPTION
  • Deoxidizing, lubricant, tar remover.
  • Clean, colourless, free from silicone, free from orthophosphoric acid and chlorinated solvents.
  • Eliminates rubber coating, light or heavy hydrocarbons.
  • This product, based on vegetal natural esters, is neutral.
  • It does not have any photochemical reactivity.
  • Very low surface tension.
  • This product is compatible with all plastic materials and elastomers. It does not affect paints.

 

  • USE FIELDS
  • Mechanical industries. Maintenance workshops. Automobile aftersales.
  • Agricultural industries and farmings. Transport materials. Cement plants.

 

  • MORE ECONOMICAL
  • Apart an obvious risk, from a safety point of view, the quantities of Butane-Propane implemented in an aerosol, are largely higher than those of a compressed gas such as CO2. It results from it, despite a net volume of more important filling, a weaker quantity of active ingredient.

 

MORE EFFICIENT BECAUSE…

  • More protective
  • DP 10 shows that its protective film is able to act as efficient “protective oil” which stops and prevents for a long time formations of rust and oxidation.

 

  • More penetrating, anti wear
  • FRICTION RATIO ACCORDING
  • TO SRV FRICTION TEST
  • The friction test SRV makes it possible to determine a friction ratio ; the more friction ratio is low :
  • – the more power consumption is low
  • – the more efforts of disassembling are weak
  • – the more noises of operation are reduced.
  • Such as we can see it on the opposite graph, DP 10 ensures an extremely weak and particularly constant friction ratio.
  • The line drawing shows the absence of peaks, which indicate the problems of seizing between surfaces. The same peaks for a standard penetrating fluid and a “high quality” penetrating fluid slightly highlight the very weak power of some penetrating fluids.

 

  • MORE ECOLOGICAL
  • DP 10 is based on vegetal origin esters. It results a completely biodegradable product according to OCDE criteria :
  • Easily biodegradable according to OCDE 301B test (follow up of CO2 emission during dissipation). Completely biodegradable according to OCDE 302C test (manometric follow up during dissipation). Moreover, DP 10 is totally free from compounds classified dangerous for environment. It has a vapour tension less than 0,1 hPa at 20°C : it is totally free from VOC.

 

  • NOT DANGEROUS FOR HEALTH
  • DP 10 is guaranteed without chlorinated solvent such as PER, TRI and methylene chloride, which are classified cancerogenic.
  • It is completely free from aromatic compounds or benzene compounds.
  • Formulated on vegetal base, it is not classified dangerous for health, according to CE criteria (non irritating, not damaging, not sensitizing, not CMR, not toxic…)
  • Easy to use, it does not issue steam and is practically odourless.

 

  • DIRECTIONS FOR USE
  • Shake the aerosol briefly. Spray without excess onto the surfaces to be disassembled or treated. Aerosol usable in any position.

Version

  • Aerosol 650 ml

Application sectors

  • Bolt and screw manufacture, pot type joints, needles, swivels, boulons, electromechanical contacts, hinges, guides, slides, telescopic antennas, chain degreasing.
  • Lubrication by spraying or impregnation of buffers of saw blades, in the second processing of wood. Planing, profiling, turning, including on very hard classified wood.
  • Lubricant allowing the sliding of wood on the feed tables.

    Request information







    INFORMATION ON THE PURPOSES OF ART. 13-14 OF THE GDPR (GENERAL DATA PROTECTION REGULATION) 2016/679
    According to the law, this treatment will be based on principles of correctness, lawfulness, transparency and protection of your privacy and your rights.
    According to article 13 of the GDPR 2016/679, therefore, we provide you with the following information:
    1. PURPOSE OF THE TREATMENT
    Personal data (name, surname, telephone, email address, etc.) provided by filling out the form will be used for the following purposes:
    a) Management of the request for information, including any accounting, administrative, logistical and organizational obligations related to it. Within the free text fields it is absolutely forbidden to insert abusive and / or offensive messages and / or to copy / paste the curriculum vitae and / or any other information not pertinent or containing sensitive data;
    b) Promotional and marketing management through the communication, to the email address provided, of commercial offers.
    2. NATURE OF DATA CONFERENCE AND CONSEQUENCES OF THE REFUSAL TO REPLY
    The provision of personal data relating to the processing of data of the data subject for the purposes of managing them for the purpose of requesting information in the ways and terms indicated in the information is mandatory, as the failure or incorrect conferment makes it impossible to process inherent the aforementioned purposes.
    The conferment of personal data of the interested party for promotional and / or marketing purposes is optional. Failure to consent does not affect the request for information.
    3. TREATMENT METHODS
    The treatment will be carried out with manual and / or computerized and telematic tools with organizational and processing logics strictly related to the purposes themselves and in any case in such a way as to guarantee the security, integrity and confidentiality of the data in compliance with organizational and physical measures and logics provided for by the provisions in force.
    4. ACCESS TO DATA AND COMMUNICATION
    The personal data provided may be disclosed to companies that manage corporate information systems, banks that provide for the payment or collection of amounts due from us or due to us, consultants and / or professionals appointed by the company and in any case the scope of dissemination of data will be strictly limited to the execution of the assignment given by us to the aforementioned subjects for the sole purpose indicated.
    The data supplied may be made aware of the Managers and the persons working under the direct authority of the owner or manager, following the instructions given to them.
    5. DURATION OF THE TREATMENT
    The Data Controller will process the personal data for the time necessary to fulfill the aforementioned purposes and in any case for no more than 10 years from the termination of the Service Finality relationship and no later than 2 years from the collection of data for the Marketing Purposes.
    6. RIGHTS OF THE INTERESTED PARTY
    You can, at any time, exercise the rights:
    - access to personal data;
    - to obtain the correction or cancellation of the same or the limitation of the processing that concerns him;
    - to oppose the treatment;
    - data portability;
    - to revoke the consent, where provided: the revocation of the consent does not affect the lawfulness of the treatment based on the consent given before the revocation;
    - to propose a complaint to the supervisory authority (Privacy Guarantor).
    The exercise of your rights can be done by sending a request by email to privacy@purmate.com
    7. HOLDER OF THE TREATMENT
    The Data Controller is Purmate Srl with registered office in Via M.Ronto, 20 - 35124 Padova (PD). The Data Processor, which you can contact to exercise the rights referred to in Art. 12 and / or for any clarifications regarding the protection of personal data can be reached at the address: privacy@purmate.com

    Category products

    Categorie Prodotti

    Settori