Ready to use release agent for elastomer polyurethane
KLEASE 07 1020 JOP is a mixture of silicones in solvent formulated for the molding of technical articles in PU elastomer. It has a good power of detachment and high slipperiness in extraction, even on pieces of
complex geometry, as well as a dirty base of the molds. Articles have a glossy finish.
KLEASE 07 1020 JOP is to be applied as supplied, by spray or rag.
Tips for using spray guns with air guns:
on the network 0.8 – 1.2 bar
on the pistol 1.5 – 2.0 bar
nozzle Ø 0.5 – 0.8 mm