FAST CLEAN PU 110, POLYURETHANE CLEANING SOLVENT.
RINSING FLUID FOR POLYURETHANE CASTING HEADS ON LOW PRESSURE MACHINE; AGRO-SOLVENT
Alternative solvent to methylene chloride with no modification to machine settings or cycle times.
iBiotec® FAST CLEAN PU 110 is used to rinse RIM compact polyurethanes, type TDI and MDI, including with very short pot life.
iBiotec® FAST CLEAN PU 110 is mainly made up of plant material by-products and materials found naturally in the environment.
iBiotec® FAST CLEAN PU 110 reduces organic vapour emissions to zero.
iBiotec® FAST CLEAN PU 110 is not flammable. Its high flashpoint means that it can be used hot or cold in total safety.
iBiotec® FAST CLEAN PU 110 contains no substance which is hazardous for health. Its constituent parts are not toxic, carcinogenic, mutagenic, toxic to reproduction, harmful, irritating, sensitising or corrosive.
MANUAL FOR COMPACT PU REMOVAL MACHINE
Wash cycle after polyurethane casting:
– Air blast – 10 seconds
– Injection of iBiotec® FAST CLEAN PU 110 for 3/5 seconds
– Air blast – 30 seconds
(These times are given as an indication; they may vary depending on the nature of the polyurethanes).
The lost casting (referred to as “trash casting”) is usually made for several reasons:
– 1st reason: for the homogeneous mixing of Polyol, isocyanate and (possibly) dyes,
– To prevent air bubbles,
– To eliminate residue in the chamber.
During the wash cycle, the mixing chamber can be positioned above a keg that is equipped with a funnel in order to recover the effluents that can be filtered (6/10 of a mm metallic filter); the mixture can also be decanted over a period of 24 hours.
iBiotec® FAST CLEAN PU 110 can in this way be re-used up to 4 times in a row, depending on the PU.
Compatible with PTFE seals (tests at 20°C, 80°C and 100°C) and silicone seals.
Avoid using with the following kinds of seals: neoprène, Buna, butyl chorobutyl, Viton.
Usage precautions: store in a sheltered location, in a temperate atmosphere.