ECOLEASE 03 0680 J5W Ready-to-use release agent for molding flexible PU foams ECOLEASE 03 0680 J5W is an emulsion of synthetic polymers with high release power, formulated for the molding of flexible cold polyurethane foams based on MDI or MDI/TDI blends and semi-rigid foams. It allows to obtain good detachment and slipperiness during the extraction
ECOLEASE 03 0680 J5W
26Feb
ECOLEASE 0C 7970 G7W
ECOLEASE 0C 7970 G7W is a water-based release agent for molding rigid PU; is an emulsion of synthetic polymers with high release power, formulated for the molding of high-density rigid polyurethane foams. It allows to obtain good slipperiness during the extraction phase, low soiling of the molds and good finishing of the pieces. ECOLEASE 0C
23Feb
KCHROME
Liquid coloring pastes for polyurethane, PVC and epoxy resins. Kemi color pastes for industry under the KChrome brand are characterized by high thermal stability, resistance to chemical agents and high resistance to light and ageing, and are available in a wide range of colours, both based on NCS, RAL and Pantone references . Color pastes
Effective detergent capable of removing resins, paints, adhesives, inks and glues; also removes in case of dry stains on porous materials. Removal from surfaces and tools takes place quickly, safely and effectively. Environmentally friendly formulation, it represents a safe alternative to traditional toxic and dangerous solvents (it does not contain acetone, NMP or chlorinated components).
FEATURES • Solvent without danger of use (free from pictograms) with low VOC content. • Suitable for cleaning, degreasing and eliminating oils and greases from hard surfaces in the industrial sector. • Powerful and effective alternative to hazardous solvents commonly used in industry such as methylene chloride, acetone, alcohol, NMP, etc. • Contains anticorrosive agents
PTMG is a linear polyether glycol with primary hydroxyl groups at both ends. It easily reacts with isocyanates compounds (e.g. MDI, TDI), and generates polymers with the superior characteristic described below. ■ High impact resilience ■ Hydrolysis resistance ■ Flexibility at low temperature ■ Abrasion resistance ■ Tear resistance ■ Fungus resistance The PTMG
29Jun
KEMI 0C 1500 V0A
KEMI 0C 1500 V0A is a waxy paste in aliphatic solvent that can be used for both room temperature and hot processes. With the application of the release agent, a film is created on the mold that guarantees excellent detachment of the molded items, while at the same time containing its fouling. KEMI 0C 1500
28Apr
DECAP STRIP L
UNIVERSAL PICKLING AGENT FOR PAINTS AND RESINS, WITHOUT CHLORINATED SOLVENTS, HIGH FLASH POINT / RAPID ACTION TIME DECAP STRIP L has shown great performance on all paints, enamels, resins and inks. Its formula has been developed not only to be effective on room temperature dried coatings, but also on bi-component, thermosetting and UV cured systems.
Ready to use release agent for elastomer polyurethane KLEASE 07 1800 J0P is a mixture of silicones in solvent formulated for the molding of technical articles in PU elastomer. It has a good power of detachment and high slipperiness in extraction, even on pieces of complex geometry, as well as a dirty base of the
27Jul
DEMOPLAST 780 HT
SILICONE-FREE NON-STICK LUBRICANT MOULD RELEASE FOR ELASTOMERS, THERMOPLASTICS, THERMOSETS, COMPOSITES SPECIAL FOR POROUS MATERIALS, LOADED, WITH MATERIAL LAMINATION EFFECT NON-STICK FOR HOT MOULDS, COMPLEX PARTS CERTIFIED NSF H1 FOR THE FOOD INDUSTRY (IAA) PAINTABLE, WELDABLE, ALLOWS ALL SUBSEQUENT SURFACE TREATMENTS DESCRIPTION Special plastic mould release for hot runner systems. Multi-purpose product as a substitute for